Select The Right Diamond Blades For Better Cutting

Diamond blades can do wonder in your cutting job. This is basically the reason that many of those who are working in masonry are using diamond blades in cutting whatever masonry materials they are told to cut.

Now, if you are one of those who have plans to cut something, whether graphite, concrete, blocks, bricks, or anything for whatever purpose, then the diamond blade can be your best choice.

However, with the ever growing demands for such item in the world market, the production of diamond blade is now doubled.

It’s no wonder then that today you’ll find a myriad of blades available out there for you to choose from. The blades do differ in sizes, shape and even in quality, the reason that finding the best or the right one can somehow be puzzling.

But to help you decide on which of the available blades is best for you, mentioned below some of the helpful tips you must follow when choosing for the right diamond blades for your cutting project.

Consider the following tips for choosing right diamond blades:

Tip #1: Know the Blade’s Basics

As your first objective, the blade should provide you the best production rate while meeting the right specifications of the cuts. Well, there are certain conditions that might affect your production, and these may depend on the blade exposure, the thickness and the size.

When choosing for the right diamond blades, look for the one with the right exposure. The exposure of the blade should be specified as depth of the cut or thickness of the material cutting completely through.

In both cases, it is wise to add about five mils to the blade exposure to allow an effective discharge of the slurry waste, or you can add five to ten mils for wear length.

In terms of thickness, it is maintained by many experts that the right diamond blades is the one with a thickness less than the desired kerf width.

But this too depends on the micron size of the diamonds on the blade. Perhaps one thing to note here is to select the ones with the smaller micron size as they tend to yield a smoother cut.

And speaking of size, it is important to note that the larger the micron sized diamonds are, the better it suits to cutting the hard materials, especially the ones with a large street width.

Tip #2: Decide the Materials You Will Be Cutting

To better make sure that your job will yield better results, decide the materials you will be cutting. You should match the material with the right diamond blades.

This is very much important as the nature of your material will highly affect the performance of your diamond blades.

It may even affect the speed of the cut, as well as the life of your blade. So when choosing for the right diamond blades, go for the ones that best suit your material.

Tip #3: Follow the Right Blade Application

So you’ve found the right diamond blades for your cutting needs. Now, the best move you can take is to follow the right application of the blade. Read the product description and application, and just do whatever is directed. Follow the rules and do the cutting job in the best way possible.

Popularity: 1% [?]